本文已被:浏览 416次 下载 206次
中文摘要: 复合制导仿真作为复合制导系统性能评估不可或缺的手段,跨越了“射频”和“光学”两个领域,在试验室内构建复杂战场环境,实现复合制导回路的闭环,是当前仿真研究的难点和重点。基于国内外复合制导仿真技术的发展现状,首先梳理了国内外典型复合制导仿真系统,按实现形式可分为三类:单模系统联动的复合仿真系统、基于三轴转台和基于五轴转台的复合仿真系统;然后归纳总结了复合目标模拟系统的实现形式:利用结构复合和利用器件复合;最后设计了三模复合制导目标模拟系统方案,适用于三轴转台和五轴转台。
Abstract:As an indispensable means to evaluate the combat performance of the compound guidance system, compound guidance simulation has crossed the two fields of "Radiofrequency" and "Optics". It is difficult and important to construct a complex battlefield combat environment in the test room and realize the closed-loop of the compound guidance system. Based on the development status of compound guidance simulation technology at home and abroad, this paper firstly sorted out the typical compound guidance simulation systems, which can be divided into three types according to the implementation form: the compound simulation system with single-mode system linkage, the compound simulation system based on three-axis rotary table and five-axis rotary table. Then the realization forms of compound target simulation system are summarized: using structure composite and using device composite. Finally, three-mode compound guidance target simulation systems are designed, which is suitable for the three-axis rotary table and five-axis rotary table.
文章编号:20200303 中图分类号:TJ765.4 文献标志码:A
基金项目:
引用文本:
臧海飞,刘 栗,田 义,程 禹.射频/光学复合制导仿真实现形式及发展[J].飞控与探测,2020,(3):16-24.
臧海飞,刘 栗,田 义,程 禹.射频/光学复合制导仿真实现形式及发展[J].飞控与探测,2020,(3):16-24.